Page 5 of 5 FirstFirst ... 345
Results 41 to 49 of 49

Thread: LSx Cranks & Runs For A Second

  1. #41
    Join Date
    Dec 2009
    Location
    Connecticut
    Posts
    23,107

    Default

    Quote Originally Posted by ghost-1 View Post
    I just raised the base pressure to 50 psi, no change.
    Does it still stall due to an excessively lean condition? If so, increase the Base Fuel Table in that area:
    Left click & drag to highlight a group of cells, then right click for "Offset Selected", %+10 at a time.
    May God's grace bless you in the Lord Jesus Christ.
    '92 Ford Mustang GT: 385" SBF, Dart SHP 8.2 block, TFS TW 11R 205 heads, 11.8:1 comp, TFS R-Series intake, Dominator MPFI & DIS, 36-1 crank trigger/1x cam sync, 160A 3G alternator, Optima Red battery, A/C, 100HP progressive dry direct-port NOS, Spal dual 12" fans/3-core Frostbite aluminum radiator, Pypes dual 2.5" exhaust/off-road X-pipe/shorty headers, S&W subframe connectors, LenTech Strip Terminator wide-ratio AOD/2800 RPM converter, M4602G aluminum driveshaft, FRPP 3.31 gears, Cobra Trac-Lok differential, Moser 31 spline axles, '04 Cobra 4-disc brakes, '93 Cobra booster & M/C, 5-lug Bullitt wheels & 245/45R17 tires.

  2. #42

    Default

    Raised Base Fuel Table to enrich it up, now it has started a backfire. I'm thinking there may be an issue with a sensor or wiring.

  3. #43
    Join Date
    Dec 2009
    Location
    Connecticut
    Posts
    23,107

    Default

    Quote Originally Posted by ghost-1 View Post
    Raised Base Fuel Table to enrich it up, now it has started a backfire.
    Ensure the throttle blades are open far enough to idle.

    I'm thinking there may be an issue with a sensor or wiring.
    I hope not.
    May God's grace bless you in the Lord Jesus Christ.
    '92 Ford Mustang GT: 385" SBF, Dart SHP 8.2 block, TFS TW 11R 205 heads, 11.8:1 comp, TFS R-Series intake, Dominator MPFI & DIS, 36-1 crank trigger/1x cam sync, 160A 3G alternator, Optima Red battery, A/C, 100HP progressive dry direct-port NOS, Spal dual 12" fans/3-core Frostbite aluminum radiator, Pypes dual 2.5" exhaust/off-road X-pipe/shorty headers, S&W subframe connectors, LenTech Strip Terminator wide-ratio AOD/2800 RPM converter, M4602G aluminum driveshaft, FRPP 3.31 gears, Cobra Trac-Lok differential, Moser 31 spline axles, '04 Cobra 4-disc brakes, '93 Cobra booster & M/C, 5-lug Bullitt wheels & 245/45R17 tires.

  4. #44

    Default

    Got it to run. Had to supply power to the fuel pump relay.

  5. #45
    Join Date
    Dec 2009
    Location
    Connecticut
    Posts
    23,107

    Default

    Quote Originally Posted by ghost-1 View Post
    Got it to run. Had to supply power to the fuel pump relay.
    I mentioned the system relay in post #24. You mean it wasn't wired correctly?
    May God's grace bless you in the Lord Jesus Christ.
    '92 Ford Mustang GT: 385" SBF, Dart SHP 8.2 block, TFS TW 11R 205 heads, 11.8:1 comp, TFS R-Series intake, Dominator MPFI & DIS, 36-1 crank trigger/1x cam sync, 160A 3G alternator, Optima Red battery, A/C, 100HP progressive dry direct-port NOS, Spal dual 12" fans/3-core Frostbite aluminum radiator, Pypes dual 2.5" exhaust/off-road X-pipe/shorty headers, S&W subframe connectors, LenTech Strip Terminator wide-ratio AOD/2800 RPM converter, M4602G aluminum driveshaft, FRPP 3.31 gears, Cobra Trac-Lok differential, Moser 31 spline axles, '04 Cobra 4-disc brakes, '93 Cobra booster & M/C, 5-lug Bullitt wheels & 245/45R17 tires.

  6. #46

    Default

    Quote Originally Posted by Danny Cabral View Post
    I mentioned the system relay in post #24. You mean it wasn't wired correctly?
    I didn't run that to a +12V switched source.

  7. #47
    Join Date
    Dec 2009
    Location
    Connecticut
    Posts
    23,107

    Default

    I'm glad you found the problem, but this should've been resolved much earlier.
    Before we can troubleshoot a problem, the engine must be in proper working order, and the EFI system must be correctly installed.
    Often times, a long forum thread troubleshooting a problem, results in an installation error or something non-EFI related.
    May God's grace bless you in the Lord Jesus Christ.
    '92 Ford Mustang GT: 385" SBF, Dart SHP 8.2 block, TFS TW 11R 205 heads, 11.8:1 comp, TFS R-Series intake, Dominator MPFI & DIS, 36-1 crank trigger/1x cam sync, 160A 3G alternator, Optima Red battery, A/C, 100HP progressive dry direct-port NOS, Spal dual 12" fans/3-core Frostbite aluminum radiator, Pypes dual 2.5" exhaust/off-road X-pipe/shorty headers, S&W subframe connectors, LenTech Strip Terminator wide-ratio AOD/2800 RPM converter, M4602G aluminum driveshaft, FRPP 3.31 gears, Cobra Trac-Lok differential, Moser 31 spline axles, '04 Cobra 4-disc brakes, '93 Cobra booster & M/C, 5-lug Bullitt wheels & 245/45R17 tires.

  8. #48

    Default

    Agreed, I was not aware that the relay powered anything but the fuel pump.

  9. #49
    Join Date
    Dec 2009
    Location
    Connecticut
    Posts
    23,107

    Default

    Quote Originally Posted by ghost-1 View Post
    Agreed, I was not aware that the relay powered anything but the fuel pump.
    http://forums.holley.com/showthread....9623#post69623 (System Relay Information & Troubleshooting)
    May God's grace bless you in the Lord Jesus Christ.
    '92 Ford Mustang GT: 385" SBF, Dart SHP 8.2 block, TFS TW 11R 205 heads, 11.8:1 comp, TFS R-Series intake, Dominator MPFI & DIS, 36-1 crank trigger/1x cam sync, 160A 3G alternator, Optima Red battery, A/C, 100HP progressive dry direct-port NOS, Spal dual 12" fans/3-core Frostbite aluminum radiator, Pypes dual 2.5" exhaust/off-road X-pipe/shorty headers, S&W subframe connectors, LenTech Strip Terminator wide-ratio AOD/2800 RPM converter, M4602G aluminum driveshaft, FRPP 3.31 gears, Cobra Trac-Lok differential, Moser 31 spline axles, '04 Cobra 4-disc brakes, '93 Cobra booster & M/C, 5-lug Bullitt wheels & 245/45R17 tires.

Page 5 of 5 FirstFirst ... 345

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetors have powered every NASCAR® Sprint® Cup team and nearly every NHRA® Pro–Stock champion for four decades. Now, Holley EFI is dominating the performance world as well as our products for GM's LS engine. Holley's products also include performance fuel pumps, intake manifolds & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies - Hooker Headers, Flowtech Headers, NOS Nitrous, Weiand, Earl's Performance Plumbing, or Diablosport - Holley products can give you the edge you need over the competition.
Join us