Results 1 to 3 of 3

Thread: RM-8001 Dyno Bellhousing

  1. #1

    Default RM-8001 Dyno Bellhousing

    Is there any info available regarding the RM-8001 Dyno Bellhousing?

    1) What engine bolt patterns are on the engine side flange?

    2) What is the rear plate made of and how thick is it?

    3) Are the bolt patterns on the engine flange centered so the crank centerline is always the same at the rear plate?

    4) My dyno bolts the water brake directly to the back of the bellhousing. (Land & Sea Dyno) Is this bellhousing up to the task?

    5) Or can I have a bellhousing made with the multi-pattern engine flange and the common GM trans. rear plate?

    Thanks for you time. Jeff

  2. #2
    Join Date
    Dec 2009


    Contact Lakewood/QuickTime. Their phone number is in the instructions LINK.
    May God's grace bless you in the Lord Jesus Christ.
    '92 Ford Mustang GT: 385" SBF, Dart SHP 8.2 block, TFS TW 11R 205 heads, 11.8:1 comp, TFS R-Series intake, Dominator MPFI & DIS, 36-1 crank trigger/1x cam sync, 160A 3G alternator, Optima Red battery, A/C, 100HP progressive dry direct-port NOS, Spal dual 12" fans/3-core Frostbite aluminum radiator, Pypes dual 2.5" exhaust/off-road X-pipe/shorty headers, S&W subframe connectors, LenTech Strip Terminator wide-ratio AOD/2800 RPM converter, M4602G aluminum driveshaft, FRPP 3.31 gears, Cobra Trac-Lok differential, Moser 31 spline axles, '04 Cobra 4-disc brakes, '93 Cobra booster & M/C, 5-lug Bullitt wheels & 245/45R17 tires.

  3. #3


    We purchased one of these from Lakewood, and I'm sure we would sell it if you're interested. It wasn't what we needed. It is supposed to work with LS, SBC, SBF, Hemi and I'm sure others. The problem is the rear plate. It's not a standard dyno flange that we're used to using. The flange is that of a Powerglide/Reid transmission.

    I guess you could make a rear flange to mount to your water brake. My email back from Lakewood Tech was less than helpful, even after we had the part in hand.


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
About us
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetors have powered every NASCAR® Sprint® Cup team and nearly every NHRA® Pro–Stock champion for four decades. Now, Holley EFI is dominating the performance world as well as our products for GM's LS engine. Holley's products also include performance fuel pumps, intake manifolds & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies - Hooker Headers, Flowtech Headers, NOS Nitrous, Weiand, Earl's Performance Plumbing, or Diablosport - Holley products can give you the edge you need over the competition.
Join us