Results 1 to 2 of 2

Thread: Auxiliary harnesses?

  1. #1

    Default Auxiliary harnesses?

    I will be buying Dominator soon and was wondering what some of the auxiliary harnesses were for, and what would be good to purchase right away?

  2. #2
    Join Date
    Dec 2009
    Location
    Connecticut
    Posts
    23,091

    Default

    Most people find this document very helpful:
    http://documents.holley.com/efi_sele...chart62914.pdf (Holley HP & Dominator EFI Component Selection Guide)

    Dominator Auxiliary Harnesses: https://www.holley.com/products/fuel...efi/harnesses/
    If this is a dual WBO2 sensor application, the Holley 558-401 J2A Auxiliary Harness also
    has 23 additional Inputs of all types (no Outputs), Sensor +5V power & Sensor Ground.
    http://documents.holley.com/techlibr...10555rev17.pdf (Holley EFI Wiring Manual - J2A Pin-Out/Inputs, Pages 7 & 27)
    Of course, the Dominator ECU has custom I/O on every ECU connector, but you can start with this:

    To connect up to 4 Inputs & Outputs to the EFI Main Harness, use I/O Auxiliary Harness 558-400.
    Eight Wire I/O Auxiliary Harness Connector Pin-Out (also in the Holley EFI Wiring Manual - LINK):
    Pin A...A12...White/Blue (Input #1) F,5,2,T,H,G
    Pin B...A3....White/Red (Input #2) F,5,2,T,H,G
    Pin C...A13...White/Black (Input #3) F,5,G
    Pin D...A4....White/Green (Input #4) F,5,G
    Pin E...B12...Gray/Yellow (Output #1) H,P+
    Pin F...B11...Gray/Red (Output #2) H,P+
    Pin G...B10...Gray/Black (Output #3) G,P−
    Pin H...B3....Gray/Green (Output #4) G,P−
    http://documents.holley.com/199r10516.pdf (Holley 558-400 I/O Auxiliary Harness Instructions)

    The 558-400 I/O Auxiliary Harness is 20 feet long.
    It's "plug & play" into the main harness, and an easy way to connect common things like an electric cooling fan (Link).
    This I/O Auxiliary Harness isn't required for the optional oil & fuel pressure transducers, which are also "plug & play" into the main harness.
    The oil & fuel pressure transducers are used for Data Monitoring, Data Logging and setup Outputs based on oil & fuel pressure.
    May God's grace bless you in the Lord Jesus Christ.
    '92 Ford Mustang GT: 385" SBF, Dart SHP 8.2 block, TFS TW 11R 205 heads, 11.8:1 comp, TFS R-Series intake, Dominator MPFI & DIS, 36-1 crank trigger/1x cam sync, 160A 3G alternator, Optima Red battery, A/C, 100HP progressive dry direct-port NOS, Spal dual 12" fans/3-core Frostbite aluminum radiator, Pypes dual 2.5" exhaust/off-road X-pipe/shorty headers, S&W subframe connectors, LenTech Strip Terminator wide-ratio AOD/2800 RPM converter, M4602G aluminum driveshaft, FRPP 3.31 gears, Cobra Trac-Lok differential, Moser 31 spline axles, '04 Cobra 4-disc brakes, '93 Cobra booster & M/C, 5-lug Bullitt wheels & 245/45R17 tires.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetors have powered every NASCAR® Sprint® Cup team and nearly every NHRA® Pro–Stock champion for four decades. Now, Holley EFI is dominating the performance world as well as our products for GM's LS engine. Holley's products also include performance fuel pumps, intake manifolds & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies - Hooker Headers, Flowtech Headers, NOS Nitrous, Weiand, Earl's Performance Plumbing, or Diablosport - Holley products can give you the edge you need over the competition.
Join us