Results 1 to 3 of 3

Thread: Dual Dominator Help

  1. #1

    Default Dual Dominator Help

    I have a 9375 Dominator and a 8082
    I believe one is two circuit and one is three circuit.
    I'm not sure what I should do.
    I bought them used, kinda rough looking.
    I want to run them on a BBC 588, solid roller cam radical, manual clutch 5 speed, gasoline fuel.
    Can I ask for advise on how to get these ready to work right?
    Should I do certain things to them on my own?
    Or should I have someone rebuild them?
    Do they actually match and flow these to work together? How do I know I'm getting all that work?
    Thanks for any help and advice.

  2. #2


    First I would ask, how ROUGH is ROUGH? Was it stored outside? Lots of tiny passages in carburetors then can get obstructed or clogged. If you have a local carb/race shop that would be willing to tell you rather or not, it is worth it. I would start with the main body, that's probably the most expensive, next to the base plate or metering plates.

    If they're not too bad looking, buy a rebuild kit. $40 or so, rebuild one of them and give it a shot. If you haven't rebuilt a carb before, take it to a shop.

  3. #3


    I'm in N.W. Ohio. Can you say who can help rebuild and set them up for me? I want to run them together on a tunnel ram. Thanks for the advice.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
About us
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetors have powered every NASCAR® Sprint® Cup team and nearly every NHRA® Pro–Stock champion for four decades. Now, Holley EFI is dominating the performance world as well as our products for GM's LS engine. Holley's products also include performance fuel pumps, intake manifolds & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies - Hooker Headers, Flowtech Headers, NOS Nitrous, Weiand, Earl's Performance Plumbing, or Diablosport - Holley products can give you the edge you need over the competition.
Join us