Results 1 to 3 of 3

Thread: NOS Launcher Controller Issue

  1. #1

    Default NOS Launcher Controller Issue

    I'm trying to run this system on the dyno, but in the software monitor screen, I always have a "WILL NOT FIRE" message instead of the nitrous stage progress bars like is shown in the install & operation documentation. There is no other information on this message and I have read the install & programming instructions 40 times now. In the monitor, and on the datalog RPM, WBO2 & TPS all read perfectly and 'activate', but the nitrous stage I will not fire.

  2. #2
    Join Date
    Dec 2009
    Location
    Connecticut
    Posts
    18,642

    Default

    Quote Originally Posted by FPSeth View Post
    ...but in the software monitor screen, I always have a "WILL NOT FIRE" message instead of the nitrous stage progress bars like is shown in the install & operation documentation.
    Maybe this helps?
    http://inductionsolutions.com/forums...ncher-problems
    http://www.yellowbullet.com/forum/sh...98#post4174698
    May God's grace bless you in the Lord Jesus Christ.

    '78 BRONCO: 508" stroker, TFS heads, 11:1 comp ratio, Dominator MPFI & DIS, cold air induction, Spal dual 12" fans/aluminum radiator, dual 3" exhaust/Magnaflow mufflers, Moroso vacuum pump, Accusump, engine oil & trans fluid coolers, 100HP progressive dry direct-port NOS, A/C, LenTech Strip Terminator wide-ratio AOD/2500 RPM converter, 3:1 Atlas II, modified Dana 44/60-lockers-4.10s, hydroboost/4-disc brakes, ram-assist/heim joint steering, Cage long radius arms, traction bars, 4" Skyjacker lift, 35" mud tires

  3. #3

    Default

    I called tech support today, and they figured out the problem very quickly.
    I had entered the serial number of the wideband controller in the 'Slave'
    section, but the wideband is not a slave, only an extra input.
    Leave the 'Slave' serial number blank, and the system works perfectly.

    Exactly what the other posts said in the links. Thank you for the quick
    response Danny. Now people with the same issue can find the solution here too.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetors have powered every NASCAR® Sprint® Cup team and nearly every NHRA® Pro–Stock champion for four decades. Now, Holley EFI is dominating the performance world as well as our products for GM's LS engine. Holley's products also include performance fuel pumps, intake manifolds & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies - Hooker Headers, Flowtech Headers, NOS Nitrous, Weiand, Earl's Performance Plumbing, or Diablosport - Holley products can give you the edge you need over the competition.
Join us