Results 1 to 3 of 3

Thread: Transbrake with bump function.

  1. #1

    Default Transbrake with bump function.

    I want to make sure I got this. Setting up the bump function of Dominator. Think I have the idea down. The output of the the TB button will be connected to the red wire of the the protection module AND the orange wire of the solenoid. The blue wire of the protection module is then connected to a H input. Now, when I Pin Map it, what will the TYPE I select in the pull down menu, +12V? Now when the transbrake is used to activate a function, will I need to refer the function to the transbrake pin? Also, can I use any H input or is there a specific pin I need to use. Will be using Rev Limiter #1 as the 2-Step. Plan on using a PWM- for the duty cycle of the solenoid. See any problems with this setup. Thanks.
    Click image for larger version. 

Name:	9A0F3EBB-8AAA-4C8E-BE69-FD1AB7168F1F.jpg 
Views:	32 
Size:	92.2 KB 
ID:	9047

  2. #2


    This may help:

    Here's how I ended up wiring it:

    Click image for larger version. 

Name:	Holley-Bump-Box---FINAL.jpg 
Views:	33 
Size:	16.8 KB 
ID:	9057
    Last edited by viciousride; 12-29-2019 at 07:07 AM.

  3. #3
    Join Date
    Mar 2016


    That video is the best setup. I've tried a 5 volt knob that Holley suggested and several others. Just don't go too low or it gets worse.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
About us
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetors have powered every NASCAR® Sprint® Cup team and nearly every NHRA® Pro–Stock champion for four decades. Now, Holley EFI is dominating the performance world as well as our products for GM's LS engine. Holley's products also include performance fuel pumps, intake manifolds & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies - Hooker Headers, Flowtech Headers, NOS Nitrous, Weiand, Earl's Performance Plumbing, or Diablosport - Holley products can give you the edge you need over the competition.
Join us