Results 1 to 3 of 3

Thread: Alex Healey's 2001 Pontiac Trans Am

  1. #1
    Join Date
    Sep 2014
    Bowling Green, KY
    Blog Entries

    Post Alex Healey's 2001 Pontiac Trans Am

    Hey guys & girls,

    I thought I'd share my project on here to go along with the rest of the Holley family. I have owned this car for eight years. It began as my daily driver in high school, and has evolved a lot since then. Prior to the current build, it made 530 horsepower and 498 lb/ft of torque at the wheels with a 408 cubic inch LQ9-based engine with a custom ground cam, AFR 225 heads, a FAST 90 mm intake, and much more. After awhile, I got used to that power and the 10.60 elapsed times it brought in the 1/4 mile at 128 mph. Without further ado, here is the current modification list:

    -Forged LS2-based short block assembled by Late Model Engines (366 cid, 9.68:1 static compression ratio)
    -Trick Flow 235 cylinder heads
    -Custom specced cam from Sanders Induction Solutions (243°/247°, .624"/.624", 115+4 LSA)
    -Custom headers by J&J Motorsports
    -Custom turbo hot side, cold side, and fender exit exhaust by D3 Engineering and J&J Motorsports
    -Custom air-to-water intercooler and radiator/radiator support by D3 Engineering
    -Edelbrock Victor Jr. intake manifold w/ Holley 4150 4bbl throttle body and Extreme Velocity carb hat
    -LS9 head gaskets
    -Forced Inductions Borg Warner S485R Turbo w/ ET-R HO billet wheel
    -Injector Dynamics 1300 cc/min injectors
    -Holley brushless Ultra Dominator fuel pump and regulator
    -Dedenbear CO2 system for boost control

    -ATI Superglide 1 w/ transbrake
    -ATI fuel/blown series torque converter
    -BMR transmission crossmember
    -PST 4" aluminum driveshaft
    -Burkhart Chassis 9" housing
    -Moser aluminum center section
    -3.50 gear, spool, 40-spline gun-drilled and star-flanged axles

    -Custom-valved Menscer Motorsports AFCO shocks front and rear
    -Burkhart Chassis lower control arms
    -Burkhart Chassis torque arm
    -Burkhart Chassis rear anti-roll bar
    -Spohn chromoly tubular k-member and engine mounts
    -10-point chromoly cage by Jessie's Garage
    -Weld-in subframe connectors
    -Madman SYA bars
    -Aerospace drag brakes (dual calipers on the rear)

    -Holeshot Revolver wheels, 15"x10" rear, 15"x3.5" front
    -Mickey Thompson 275/60/15 drag radials
    -Mickey Thompson front runners

    -Holley Dominator EFI
    -Holley Digital Dash

    -Wolfe Racecraft mini-tubs
    -VFN Fiberglass pin-on cowl hood w/ DZUS fasteners

    In this video, the car is equipped with a Holley Brushless Ultra Dominator fuel pump, which allowed us to push the car to 20 psi before the injectors were maxed out. This yielded 1,038 horsepower.


    UPDATED: 2/11/16 by Alex Healey
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	0949f461-efeb-4d2e-aaf5-30cb95e9dfa1.jpg 
Views:	90 
Size:	103.1 KB 
ID:	1183   Click image for larger version. 

Name:	0b5d0de1-c927-4b34-91fd-d5cb485a73ae.jpg 
Views:	113 
Size:	61.6 KB 
ID:	1184   Click image for larger version. 

Name:	11295918_1588535398094870_3245690357215444925_n.jpg 
Views:	112 
Size:	75.1 KB 
ID:	1206  
    Last edited by Alex Healey; 02-25-2016 at 10:26 AM.

  2. #2
    Join Date
    Sep 2012
    Scottsville, KY


    I'm glad you have the car back, and working towards making it better.
    <a href= target=_blank rel=nofollow></a>

    Modern Speed
    Derek Johnson

  3. #3
    Join Date
    Sep 2014
    Bowling Green, KY
    Blog Entries


    Thanks Derek, it has been a long time coming. Can't wait to get it all together and start making some track hits in the future.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
About us
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetors have powered every NASCAR® Sprint® Cup team and nearly every NHRA® Pro–Stock champion for four decades. Now, Holley EFI is dominating the performance world as well as our products for GM's LS engine. Holley's products also include performance fuel pumps, intake manifolds & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies - Hooker Headers, Flowtech Headers, NOS Nitrous, Weiand, Earl's Performance Plumbing, or Diablosport - Holley products can give you the edge you need over the competition.
Join us