Results 1 to 2 of 2

Thread: MSD 6AL-2 & Avenger Timing Setup

  1. #1

    Default MSD 6AL-2 & Avenger Timing Setup

    If I ran the MSD 6AL-2 and set the timing curve through the Avenger EFI system, would I lose the 20 degree multi-spark feature built into the MSD ignition?

  2. #2
    Join Date
    Dec 2009


    No, the MSD CD ignition box will still fire the coil the same way it always does.
    I prefer the ECU to control timing (because there are many ECU parameters/features that function off of the timing control), and use the MSD CD ignition box for increased spark energy.

    31x31 Timing Table,
    Idle Spark Control,
    Rev Limiters,
    2-Step Retard,
    General Timing Retards,
    Boost Timing Retards,
    N2O Timing Retards,
    Water/Meth Retards,
    Traction Control Retards,
    Trans Torque Retards,
    Cranking Retard,
    Knock Sensors,
    CTS Modifier,
    IAT Modifier,
    Advanced ICF, etc.
    May God's grace bless you in the Lord Jesus Christ.
    '92 Ford Mustang GT: 385" SBF, Dart SHP 8.2 block, TFS TW 11R 205 heads, 11.8:1 comp, TFS R-Series intake, Dominator MPFI & DIS, 36-1 crank trigger/1x cam sync, 160A 3G alternator, Optima Red battery, A/C, 100HP progressive dry direct-port NOS, Spal dual 12" fans/3-core Frostbite aluminum radiator, Pypes dual 2.5" exhaust/off-road X-pipe/shorty headers, S&W subframe connectors, LenTech Strip Terminator wide-ratio AOD/2800 RPM converter, M4602G aluminum driveshaft, FRPP 3.31 gears, Cobra Trac-Lok differential, Moser 31 spline axles, '04 Cobra 4-disc brakes, '93 Cobra booster & M/C, 5-lug Bullitt wheels & 245/45R17 tires.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
About us
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetors have powered every NASCAR® Sprint® Cup team and nearly every NHRA® Pro–Stock champion for four decades. Now, Holley EFI is dominating the performance world as well as our products for GM's LS engine. Holley's products also include performance fuel pumps, intake manifolds & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies - Hooker Headers, Flowtech Headers, NOS Nitrous, Weiand, Earl's Performance Plumbing, or Diablosport - Holley products can give you the edge you need over the competition.
Join us