Tweet
2454-1HKR Install Issue - '69 Chevy C20, 2WD, Stock 396 BB, TH400 Auto
I'm replacing a set of 30+ year old Hooker Headers with the 2454-1HKR set. There is a clearance issue with the lower control arm on the passenger side. Would a Porta-Power be appropriate to adjust passenger header, to give about an inch or so of clearance? Any suggestions? I bought these some time ago, and finally made time to put them in. The shop that purchased them from is no longer in business, and I'm pretty sure that the warranty is down the road by now.
- If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. Please be aware that this is a community forum. Although Holley employees will take part in answering questions from time to time, your questions may or may not be answered by Holley personnel. Thus, Holley can not guarantee an answer or timing on an answer.
Comment