1850 - 3 question

[redster55]

Putting a kit into 1850 and it had only six screws in base plate to body...is this correct or am I missing two....also noticed the gasket between primary plate and body had a cutout above power valve and there is no tube to connect accel pump circuit to body.. this appears to be the wrong gasket .. the gasket in the holley kit did not have the cut out but a small hole and it made sense to use it.
Thanks for your help...it has been a while since I fooled with these things.

[TravisW]

Putting a kit into 1850 and it had only six screws in base plate to body...is this correct or am I missing two....also noticed the gasket between primary plate and body had a cutout above power valve and there is no tube to connect accel pump circuit to body.. this appears to be the wrong gasket .. the gasket in the holley kit did not have the cut out but a small hole and it made sense to use it.
Thanks for your help...it has been a while since I fooled with these things.

Hi,
Six screws are correct you only have three across the front of the plate and three across the back, the center holes remain open. The gasket you chose should be correct as well if you do not have the accelerator pump tube.Thank you for posting and if you have any further questions just let me know.