Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 26

Thread: New Digital & LCD Displays

  1. #11
    Join Date
    Nov 2013
    Location
    Chicago IL
    Posts
    1,959

    Default

    Shipping was delayed. They should ship out any day now...I hope.
    I was told you can use two units at the same time.
    CAN Bus 1 uses pins J1-A32 (High) and J1-A24 (Low)
    CAN Bus 2 uses pins J3-B20 (High) and J3-B14 (Low)
    Last edited by S2H; 01-15-2015 at 07:27 PM.
    -Scott
    Don't forget to check out progress on my Race Car:
    Project Blasphemy - 8.07 @ 171
    Low 8 Second Street Car

  2. #12
    Join Date
    Nov 2013
    Location
    Chicago IL
    Posts
    1,959

    Default

    I was given dimensions straight from Adam Layman at Holley.
    The screen is 6.050" x 3.750".
    The amount of housing material around the screen is as follows:
    .370" Above screen
    .650" Below screen
    .760" L & R sides of the screen
    The corner radius is approximately 0.400" if you are plotting it in AutoCad for mounting.
    Last edited by S2H; 01-15-2015 at 07:30 PM.
    -Scott
    Don't forget to check out progress on my Race Car:
    Project Blasphemy - 8.07 @ 171
    Low 8 Second Street Car

  3. #13
    Join Date
    Nov 2013
    Location
    Chicago IL
    Posts
    1,959

    Default

    Just for reference, the Digital Dash is shipping now. I've already made a custom screen, and I should have it mounted in my car dash this weekend:

    -Scott
    Don't forget to check out progress on my Race Car:
    Project Blasphemy - 8.07 @ 171
    Low 8 Second Street Car

  4. #14
    Join Date
    Dec 2009
    Location
    Connecticut
    Posts
    17,638

    Default

    Quote Originally Posted by S2H View Post
    Just for reference, the Digital Dash is shipping now.
    I received mine too, and I'm working on the mounting.
    But it will be one or two weeks before I can install it.

    I've already made a custom screen, and I should have it mounted in my car dash this weekend:
    I'm looking forward to seeing that.
    May God's grace bless you in the Lord Jesus Christ.

    '78 BRONCO: 508" stroker, TFS heads, 11:1 comp ratio, Dominator MPFI & DIS, cold air induction, Spal dual 12" fans/aluminum radiator, dual 3" exhaust/Magnaflow mufflers, Moroso vacuum pump, Accusump, engine oil & trans fluid coolers, 100HP progressive dry direct-port NOS, A/C, LenTech Strip Terminator wide-ratio AOD/2500 RPM converter, 3:1 Atlas II, modified Dana 44/60-lockers-4.10s, hydroboost/4-disc brakes, ram-assist/heim joint steering, Cage long radius arms, traction bars, 4" Skyjacker lift, 35" mud tires

  5. #15
    Join Date
    Nov 2013
    Location
    Chicago IL
    Posts
    1,959

    Default

    Quote Originally Posted by Danny Cabral View Post
    I'm looking forward to seeing that.
    Ask and you shall receive.

    -Scott
    Don't forget to check out progress on my Race Car:
    Project Blasphemy - 8.07 @ 171
    Low 8 Second Street Car

  6. #16
    Join Date
    Nov 2014
    Location
    Crown Point IN
    Posts
    11

    Default

    Got both of mine today. Thought it would be her March 17, but they showed up today! Going to have an expanded dash.


  7. #17
    Join Date
    Dec 2009
    Location
    Connecticut
    Posts
    17,638

    Default

    Quote Originally Posted by S2H View Post
    Ask and you shall receive.
    S2H, that dashboard looks very nice.
    May God's grace bless you in the Lord Jesus Christ.

    '78 BRONCO: 508" stroker, TFS heads, 11:1 comp ratio, Dominator MPFI & DIS, cold air induction, Spal dual 12" fans/aluminum radiator, dual 3" exhaust/Magnaflow mufflers, Moroso vacuum pump, Accusump, engine oil & trans fluid coolers, 100HP progressive dry direct-port NOS, A/C, LenTech Strip Terminator wide-ratio AOD/2500 RPM converter, 3:1 Atlas II, modified Dana 44/60-lockers-4.10s, hydroboost/4-disc brakes, ram-assist/heim joint steering, Cage long radius arms, traction bars, 4" Skyjacker lift, 35" mud tires

  8. #18
    Join Date
    Nov 2013
    Location
    Chicago IL
    Posts
    1,959

    Default

    Quote Originally Posted by Danny Cabral View Post
    S2H, that dashboard looks very nice.
    Thanks. Completed...ready for install.
    Just have a little bit of wiring to do inside the car, for the changes in my Dashboard layout.



    -Scott
    Don't forget to check out progress on my Race Car:
    Project Blasphemy - 8.07 @ 171
    Low 8 Second Street Car

  9. #19
    Join Date
    Nov 2014
    Location
    Crown Point IN
    Posts
    11

    Default

    Here's a video of one side I have been working on:

    Last edited by Grnova; 02-13-2015 at 05:05 PM.

  10. #20

    Default

    I bought a Microsoft Surface Pro to basically do the same thing as the Digital Dash. Any reason why I wouldn't be able to use it that way? It runs a full version of Windows and has a USB port.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetors have powered every NASCAR® Sprint® Cup team and nearly every NHRA® Pro–Stock champion for four decades. Now, Holley EFI is dominating the performance world as well as our products for GM's LS engine. Holley's products also include performance fuel pumps, intake manifolds & engine dress–up products for street performance, race and marine applications. As a single solution, or partnered with products from other Holley companies - Hooker Headers, Flowtech Headers, NOS Nitrous, Weiand, Earl's Performance Plumbing, or Diablosport - Holley products can give you the edge you need over the competition.
Join us