21 results in 0.0089 seconds.
-
IAC Randomly Stuck Open
We have a very strange issue with the Sniper on our '66 Catalina. This is a 389 with HEI conversion, stock cam, and aftermarket intake. The Sniper has... -
A/C IAC Load Increase - Full Time, not Momentary IAC Kick.
Hello. I've previously tuned my Mustang with a QuarterHorse prior to getting a new engine with the Terminator X. In the old software you can offset the...Last edited by Chris93Cobra; 07-06-2022, 10:08 PM. -
2300 Sniper with AFR IAC Problem.
Hello friends, I have a problem with my 2300. When I installed it, it worked correctly, more than a few months it has had some problems. The RPM is registered... -
Crazy wild IAC swings on Sniper setup.
Howdy all. New Sniper install on a fresh BBC 468 build, very mild cam, stand-alone HEI, nothing fancy going on, +15" vacuum at idle. Engine... -
Holley 543-105 IAC Specs
I have the Chrysler type IAC 543-105. Does anyone know the number of steps, and the best frequency to operate this stepper motor IAC? -
IAC valve is working opposite.
I have a MOPAR fuel injection kit from the early 2000 years. It has a early design 4BBL throttle body which MOPAR tech hotline said was most likley a... -
High idle at operating temp, even while driving.
Hi, all. I've recently installed the Sniper EFI on my Mustang with help from a friend. The problem I'm running into is that once it's warmed up, the IAC...Last edited by Marcus; 05-08-2020, 04:48 PM. -
IAC TPI Selection
In selecting the IAC control on a TPI engine (I'm using the GM type), which should I use from the drop down menu in the "Advance Idle Control&qu... -
IAC goes high, when is Learning done?
Hello all. I have a relatively new install, just a few weeks with a non-daily driver street car. I've done the idle screw adjustment procedure, and have... -
Terminator X idle IAC Position?
I’ve installed a Terminator X on a LSx 5.3L. I went through the checklist on startup. I'm currently trying to get the IAC Position to 2% at idle... -
Ford IAC body for HP EFI.
I have a 347 stroker SBF with the HP EFI system. I'm wondering how to work with the IAC valve. I have a 75mm throttle body, but I'm not sure what to use... -
Another funky idle IAC thread.
Hello all. My issue is that after about 175°F temp, my idle starts to fluctuate a bit. I can deal with that, but out of nowhere (0% TPS) it shoots up... -
New Sniper Installation
I'm replacing a PowerJection III on my '68 Firebird. The PowerJection ran really strong, but I want more outputs for NOS, Digital Gauges, etc. The install... -
Slow "return to idle" IAC control.
I recently upgraded the Terminator ECU from V2 to V4. Since then, when the engine is cold, it idles well but, if I raise the RPM (even slightly) and... -
IAC uncontrolled at 65% & 2000 RPM.
I have a fairly new install on a Chevy 383. Had a TPS sensor fail, replaced it, running great. The one issue I'm having is every once and while, when...
