Holley Sniper, no RPM signal.

[Tuffy331]

Hello. I've recently installed a Holley Sniper and HyperSpark on my 1997 383 stroker. I'm currently running 30° timing at idle, anything lower and it...

[Mr Impala]

Greetings all. I've been running the Sniper EFI on my car for a couple years now. I decided to upgrade to the HyperSpark distributor, coil, and CDI box....

[JFoust]

Hello everyone. I'm new here and this is my first post so I'll try to be to the point. I have a 1983 Jeep Wagoneer with an AMC360. I bought the truck...

[Steve-OT]

Installed whole Holley setup: Sniper, HyperSpark, & In-Tank Pump on 327 SBC (Stock).

Car starts & runs, but is not hitting on all...

[Gregtx]

Hi! I'm trying to get a combination of a HyperSpark distributor and Sniper EFI to work only using the coil driver, and a traditional canister coil. I'm...

[King_Crow]

Good Afternoon Everyone. I want to start off by saying working on cars is a VERY part time hobby for me, with a 50 hour a week job and a three year old,...

[dewsky]

Bear with me folks. 1975 Plymouth Duster, 360, Manual Transmission. New install of a Sniper EFI. All connections hooked up. Fuel, electrical, everything...

[HighViscosity]

I've installed the Sniper EFI with the complete HyperSpark ignition system and I'm just curious what everyone's timing numbers look like. I understand...

[jpalmer1717]

Hey folks. I'd like to upgrade my distributor to the HyperSpark in hopes to cure a problem I've had with this car since purchasing last year. That's another...

[KevinDS]

Sniper EFI & HyperSpark distributor CDI box. SBC, has been installed for a year and was running great until yesterday when I got a huge backfire and...

[Fka65]

Hi all. I've lurked a bunch and haven’t really found much so I’m hoping for some guidance. Last year, I had a workshop install a full Holley Sniper...

[Sirstang67]

I'd just like to double check the wiring of the included Coil Driver Module when used with a HyperSpark distributor. Is it wired the same as the Dual...

[Gtmst3]

I have a '79 C10 355 with a mild cam. I've installed a Holley Sniper with HyperSpark ignition. The truck cranks and fires, but will not stay running....

[ibinyth]

I plan on relocating my battery to under the bed of my C10 and tucking my harness and other wiring. Both the Sniper and the HyperSpark want power &...

[Toyjoeta]

Helped a friend install a HyperSpark system on a 350 in his Jeep. We have no spark in #1 cylinder. He’s replaced about everything, wires, plugs, and...