-
It will be A "blown" 350 pretty soon. It is doable, but you're asking for trouble. By the time you invest in everything needed to get a 6-71 to run well at low boost levels, a better bottom end would be peanuts in order to allow for higher boost levels. -
Yes, but depending on how "mild" your camshaft is (increased dynamic compression ratio)
and how strong your "stock 350" engine is, you may be limited to lower boost levels.
http://www.holley.com/data/TechServi...ech%20Info.pdf (Weiand Supercharger Tech Info)Leave a comment:
-
Blown Stock 350?
I just bought a Weiand 6-71. I would like to bolt on to my rebuilt stock 350 it has 8.5:1 with mild cam. I just want the looks, sound and slight performance out of it. Can it be done?
- If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. Please be aware that this is a community forum. Although Holley employees will take part in answering questions from time to time, your questions may or may not be answered by Holley personnel. Thus, Holley can not guarantee an answer or timing on an answer.
Leave a comment: