No announcement yet.

Adding More Warnings

  • Time
  • Show
Clear All
new posts

  • Adding More Warnings

    I was wondering if it's possible (if this is even the best place) to request the addition of more preset warnings. Not sure about other users, but for me four warnings just isn't enough. I know there's only four LEDs, but you could easily add more warnings by using both left LEDs at once, or both right LEDs at once or top left and bottom right, etc., etc.

    Also, you really could get away with not even using LEDs if you ran out of combos and just allowed us to flash up some text with a word. It usually catches your attention. There's just so many things I'd like to setup warnings for and I can't because it only allows me to do four.

    I don't see it as a very difficult change since the code is already there, it's really just asking it to flash different LEDs and display a different word or something to warn you. I think it would be a feature plenty would benefit from and good feature to add for the devices. Thanks.
    ou acheter viagra sans ordonnance

  • #2
    So do Holley support staff even bother to look here? I posted this ages ago and I can understand why other users might not post, but would of thought Racepak/Holley support staff would of looked at least!

    Such a shame as the product is good, but the support is the let down. :(
    ou acheter viagra sans ordonnance


    • #3
      Contact Holley Tech Service (LINK).
      May God's grace bless you in the Lord Jesus Christ.
      '92 Ford Mustang GT: 385"/6.3L SBF, Dart SHP 8.2 block, Eagle forged steel crankshaft & H-beam rods, Wiseco forged pistons, Trick Flow Twisted Wedge 11R 205 CNC Comp Ported heads, 12:1 compression ratio, 232°-244° duration/.623" lift/114° LSA H/R camshaft, TFS R-Series FTI Comp Ported intake, BBK 80mm throttle body, Holley Dominator MPFI & DIS, Holley 36-1 crank trigger, MSD 1x cam sync, PA PMGR starter, PA 200A 3G alternator, Optima 34/78 Red battery, 100HP progressive dry direct-port NOS, R134a A/C, Spal Dual 12" HP 3168 CFM fans, Frostbite 3-core aluminum radiator, Pypes SS dual 2.5" exhaust, SS off-road X-pipe, SS shorty headers, Earl's -6AN fuel system plumbing, Walbro 255 LPH in-tank pump & Pro-M -6AN hanger, S&W subframe connectors, BMR upper & lower torque box reinforcements, LenTech Strip Terminator wide-ratio Ford AOD, 10" 3000 RPM C6 billet converter, B&M Hammer shifter, Stifflers transmission crossmember & driveshaft safety loop, FPP aluminum driveshaft, FPP 3.31 gears, Cobra Trac-Lok differential, Moser 31 spline axles, '04 Cobra 4-disc brakes, '93 Cobra booster & M/C, 5-lug Bullitt wheels & 245/45R17 M/T Street Comp tires.