Announcement

Collapse

New Member Forum Registration Trouble

NOTICE: If any new members have trouble registering on the Holley Forum, please email me directly at: d c f 1 5 0 @ c o m c a s t . n e t, and I'll resolve the problem. Please complete a new forum registration again before emailing me, so I can locate your username/account. I'll also need your forum username & email associated with the account, so I can identify it and approve your forum registration immediately. Please allow 12 hours after registering your first forum account before emailing me (I need time to approve it). The forum software deals with an incredible amount of spam every day, and sometimes wrongly deems a legitimate username or email address as spam.
Thank you, Danny Cabral
Holley Forum Administrator
See more
See less

Jets Sizes

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Jets Sizes

    OK so I've been running a Sniper plate setup for a few years now, and haven't had any problems. But I've been hearing & reading that NOS has changed their recommended jet sizes. The way my kit reads, is the N2O jet is smaller than the fuel jet. Is this true? I've been using a 63 jet for N2O & 71 jet for fuel. Is there a better way than I'm doing it? Any help would be appreciated. Thanks, Jeremy

  • #2
    Pages 3-6 of this NOS document has what you're looking for:
    http://documents.holley.com/techlibr...ech_info_2.pdf (NOS Technical Information - New Charts Here)
    http://www.yellowbullet.com/forum/sh...5&postcount=11 (Monte Smith - N2O & Timing Charts)
    May God's grace bless you in the Lord Jesus Christ.
    '92 Ford Mustang GT: 385"/6.3L SBF, Dart SHP 8.2 block, forged steel crank & rods, forged pistons, Trick Flow T/W 11R 205 CNC comp ported heads, 12:1 comp ratio, 232-244 duration/.623" lift/114 LSA camshaft, TFS R-Series FTI comp ported intake, BBK 80mm T/B, Holley Dominator MPFI & DIS, Holley 36-1 crank trigger, MSD 1x cam sync, PA PMGR starter, PA 200A 3G alternator, Optima Red battery, 100HP progressive dry direct-port NOS, R134a A/C, Spal dual 12" fans, Frostbite 3-core aluminum radiator, Pypes dual 2.5" exhaust, off-road X-pipe, shorty headers, Earl's -6AN fuel system plumbing, Walbro 255 LPH in-tank pump & Pro-M -6AN hanger, S&W subframe connectors, BMR upper & lower torque box reinforcements, LenTech Strip Terminator wide-ratio AOD, 3000 RPM C6 converter, B&M Hammer shifter, Stifflers transmission crossmember & driveshaft safety loop, FPP aluminum driveshaft, FPP 3.31 gears, Cobra Trac-Lok differential, Moser 31 spline axles, '04 Cobra 4-disc brakes, '93 Cobra booster & M/C, 5-lug Bullitt wheels & 245/45R17 M/T Street Comp tires.

    Comment


    • #3
      Would the new charts hold true for other nitrous oxide systems, also?

      Comment


      • #4
        NOS claims "no". You'd have to measure the N2O system by having it "flow tested".
        May God's grace bless you in the Lord Jesus Christ.
        '92 Ford Mustang GT: 385"/6.3L SBF, Dart SHP 8.2 block, forged steel crank & rods, forged pistons, Trick Flow T/W 11R 205 CNC comp ported heads, 12:1 comp ratio, 232-244 duration/.623" lift/114 LSA camshaft, TFS R-Series FTI comp ported intake, BBK 80mm T/B, Holley Dominator MPFI & DIS, Holley 36-1 crank trigger, MSD 1x cam sync, PA PMGR starter, PA 200A 3G alternator, Optima Red battery, 100HP progressive dry direct-port NOS, R134a A/C, Spal dual 12" fans, Frostbite 3-core aluminum radiator, Pypes dual 2.5" exhaust, off-road X-pipe, shorty headers, Earl's -6AN fuel system plumbing, Walbro 255 LPH in-tank pump & Pro-M -6AN hanger, S&W subframe connectors, BMR upper & lower torque box reinforcements, LenTech Strip Terminator wide-ratio AOD, 3000 RPM C6 converter, B&M Hammer shifter, Stifflers transmission crossmember & driveshaft safety loop, FPP aluminum driveshaft, FPP 3.31 gears, Cobra Trac-Lok differential, Moser 31 spline axles, '04 Cobra 4-disc brakes, '93 Cobra booster & M/C, 5-lug Bullitt wheels & 245/45R17 M/T Street Comp tires.

        Comment

        Working...
        X