Announcement

Collapse
No announcement yet.

Jets Sizes

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Jets Sizes

    OK so I've been running a Sniper plate setup for a few years now, and haven't had any problems. But I've been hearing & reading that NOS has changed their recommended jet sizes. The way my kit reads, is the N2O jet is smaller than the fuel jet. Is this true? I've been using a 63 jet for N2O & 71 jet for fuel. Is there a better way than I'm doing it? Any help would be appreciated. Thanks, Jeremy

  • #2
    Pages 3-6 of this NOS document has what you're looking for:
    http://documents.holley.com/techlibr...ech_info_2.pdf (NOS Technical Information - New Charts Here)
    http://www.yellowbullet.com/forum/sh...5&postcount=11 (Monte Smith - N2O & Timing Charts)
    May God's grace bless you in the Lord Jesus Christ.
    '92 Ford Mustang GT: 385"/6.3L SBF, Dart SHP 8.2 block, forged steel crank & rods, forged pistons, Trick Flow T/W 11R 205 CNC comp ported heads, 12:1 comp ratio, 232-244 duration/.623" lift/114 LSA camshaft, TFS R-Series FTI comp ported intake, BBK 80mm T/B, Holley Dominator MPFI & DIS, Holley 36-1 crank trigger, MSD 1x cam sync, PA PMGR starter, PA 200A 3G alternator, Optima Red battery, 100HP progressive dry direct-port NOS, R134a A/C, Spal dual 12" fans, Frostbite 3-core aluminum radiator, Pypes dual 2.5" exhaust, off-road X-pipe, shorty headers, Earl's -6AN fuel system plumbing, Walbro 255 LPH in-tank pump & Pro-M -6AN hanger, S&W subframe connectors, BMR upper & lower torque box reinforcements, LenTech Strip Terminator wide-ratio AOD, 3000 RPM C6 converter, B&M Hammer shifter, Stifflers transmission crossmember & driveshaft safety loop, FPP aluminum driveshaft, FPP 3.31 gears, Cobra Trac-Lok differential, Moser 31 spline axles, '04 Cobra 4-disc brakes, '93 Cobra booster & M/C, 5-lug Bullitt wheels & 245/45R17 M/T Street Comp tires.

    Comment


    • #3
      Would the new charts hold true for other nitrous oxide systems, also?

      Comment


      • #4
        NOS claims "no". You'd have to measure the N2O system by having it "flow tested".
        May God's grace bless you in the Lord Jesus Christ.
        '92 Ford Mustang GT: 385"/6.3L SBF, Dart SHP 8.2 block, forged steel crank & rods, forged pistons, Trick Flow T/W 11R 205 CNC comp ported heads, 12:1 comp ratio, 232-244 duration/.623" lift/114 LSA camshaft, TFS R-Series FTI comp ported intake, BBK 80mm T/B, Holley Dominator MPFI & DIS, Holley 36-1 crank trigger, MSD 1x cam sync, PA PMGR starter, PA 200A 3G alternator, Optima Red battery, 100HP progressive dry direct-port NOS, R134a A/C, Spal dual 12" fans, Frostbite 3-core aluminum radiator, Pypes dual 2.5" exhaust, off-road X-pipe, shorty headers, Earl's -6AN fuel system plumbing, Walbro 255 LPH in-tank pump & Pro-M -6AN hanger, S&W subframe connectors, BMR upper & lower torque box reinforcements, LenTech Strip Terminator wide-ratio AOD, 3000 RPM C6 converter, B&M Hammer shifter, Stifflers transmission crossmember & driveshaft safety loop, FPP aluminum driveshaft, FPP 3.31 gears, Cobra Trac-Lok differential, Moser 31 spline axles, '04 Cobra 4-disc brakes, '93 Cobra booster & M/C, 5-lug Bullitt wheels & 245/45R17 M/T Street Comp tires.

        Comment

        Working...
        X