Announcement

Collapse
No announcement yet.

Mag 20 & retard 8168.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Mag 20 & retard 8168.

    Checking timing with a timing light and the base timing is changing 10 from last startup without changing anything. I have not found any mechanical issue. No crank trigger used. I never had this issue without 8168 installed. Possible wiring issue? Ground issue? Only using 1 side of 8168, 4 chip, 4 verified with light, but initial is different each time I started it. Ideas?
Working...
X