Grid with 7763 added!!

installed Grid system and it powered and connected to laptop, then later install can bus module and 7763 boost modules, Grid still powers and connects but no power light and dont see module in the software, checked the harnesses and the can bus is the same as the grid and boost module is also, but no power light from module and dont see it in the software!!

what version of software?

did you download it via wifi or land line?

72sbc...is this mark?

[72sbc]

I'm sending mine back for a replacement. Exact same thing happened. I was instructed to unplug the solenoids and connect back to the CAN bus but nothing changed. You may try that first. They were thinking that maybe one of the solenoids was pulling current.

[us93x]

installed Grid system and it powered and connected to laptop, then later install can bus module and 7763 boost modules, Grid still powers and connects but no power light and dont see module in the software, checked the harnesses and the can bus is the same as the grid and boost module is also, but no power light from module and dont see it in the software!!