Announcement

Collapse
No announcement yet.

Atomic MSD EFI install

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Atomic MSD EFI install

    I have a 68 Camaro and recently bought a Blueprint 396 Small Block Chevy Stroker and the Atomic MSD EFI master kit.

    After looking at everything, I've realized the best way is to run it is with a Tanks Inc EFI tank and your return line kit.

    Where do you suggest mounting the regulator on the car for the return line?

  • #2
    like this:

    Click image for larger version

Name:	55 7.jpg
Views:	1
Size:	55.2 KB
ID:	342839


    you can get these brackets at any speed shop .
    https://www.holley.com/products/fuel...s/parts/20-120

    Comment


    • #3
      Thanks alot for the pic. Man, that is an expensive bracket!

      I have another question. ..I have shorty headers, can the bung be welded into the very small collection area before it they bolt to the exhaust?

      Comment


      • #4
        It is better to weld the 02 sensor further down (towards the rear of the car) the exhaust pipe and weld the bung in there?

        Comment


        • #5
          Thanks! I appreciate it

          Comment


          • #6
            I bought the bracket but your regulator does not mount up to it. Is there a trick or do I have to fabricate another bracket to make the regulator mount to the Holley bracket?

            Comment

            Working...
            X