No announcement yet.

Main Harness Option

  • Filter
  • Time
  • Show
Clear All
new posts

  • Main Harness Option

    Besides the Holley 558-128 harness that came with the Fox body kit, is there another harness that would better for me? I'll be running a GM IAC motor & TPS along with using Dual Sync distributor. I'm also looking into Coil-Near-Plug, so if it had that as well. I've heard that the Fox body harness is not shielded for cam sensors & such, not certain if there's any truth to that either. Would that make a good case to use another harness as well?

  • #2
    Originally posted by RobM View Post
    I'm also looking into Coil-Near-Plug, so if it had that as well. (Holley EFI 558-118 Ford Universal MPFI Coil-Near-Plug Main Harness)
    May God's grace bless you in the Lord Jesus Christ.
    '92 Ford Mustang GT: 385"/6.3L SBF, Dart SHP 8.2 block, forged steel crank & rods, forged pistons, Trick Flow T/W 11R 205 CNC comp ported heads, 12:1 comp ratio, 232-244 duration/.623" lift/114 LSA camshaft, TFS R-Series FTI comp ported intake, BBK 80mm T/B, Holley Dominator MPFI & DIS, Holley 36-1 crank trigger, MSD 1x cam sync, PA PMGR starter, PA 200A 3G alternator, Optima Red battery, 100HP progressive dry direct-port NOS, R134a A/C, Spal dual 12" fans, Frostbite 3-core aluminum radiator, Pypes dual 2.5" exhaust, off-road X-pipe, shorty headers, Earl's -6AN fuel system plumbing, Walbro 255 LPH in-tank pump & Pro-M -6AN hanger, S&W subframe connectors, BMR upper & lower torque box reinforcements, LenTech Strip Terminator wide-ratio AOD, 3000 RPM C6 converter, B&M Hammer shifter, Stifflers transmission crossmember & driveshaft safety loop, FPP aluminum driveshaft, FPP 3.31 gears, Cobra Trac-Lok differential, Moser 31 spline axles, '04 Cobra 4-disc brakes, '93 Cobra booster & M/C, 5-lug Bullitt wheels & 245/45R17 M/T Street Comp tires.