Announcement

Collapse
No announcement yet.

Turn Fans Off When Starting Hot

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Turn Fans Off When Starting Hot

    Hello is their a way in the Terminator X EFI software to turn the fans off when cranking? Everything is working correctly, but if you try and restart a hot car both fans are running drawing amps when your trying to start the car. Thanks, Greg

  • #2
    Only by creating a custom Electric Fan Output in the Inputs/Outputs ICF (not in Basic I/O - System ICF).
    May God's grace bless you in the Lord Jesus Christ.
    '92 Ford Mustang GT: 385"/6.3L SBF, Dart SHP 8.2 block, forged steel crankshaft & H-beam rods, forged pistons, Trick Flow Twisted Wedge 11R 205 CNC Comp Ported heads, 12:1 compression ratio, 232-244 duration/.623" lift/114 LSA camshaft, TFS R-Series FTI Comp Ported intake, BBK 80mm throttle body, Holley Dominator MPFI & DIS, Holley 36-1 crank trigger, MSD 1x cam sync, PA PMGR starter, PA 200A 3G alternator, Optima 34/78 Red battery, 100HP progressive dry direct-port NOS, R134a A/C, Spal Dual 12" HP 3168 CFM fans, Frostbite 3-core aluminum radiator, Pypes dual 2.5" exhaust, off-road X-pipe, shorty headers, Earl's -6AN fuel system plumbing, Walbro 255 LPH in-tank pump & Pro-M -6AN hanger, S&W subframe connectors, BMR upper & lower torque box reinforcements, LenTech Strip Terminator wide-ratio AOD, 3000 RPM C6 converter, B&M Hammer shifter, Stifflers transmission crossmember & driveshaft safety loop, FPP aluminum driveshaft, FPP 3.31 gears, Cobra Trac-Lok differential, Moser 31 spline axles, '04 Cobra 4-disc brakes, '93 Cobra booster & M/C, 5-lug Bullitt wheels & 245/45R17 M/T Street Comp tires.

    Comment


    • #3
      OK, I made new fan outputs and its doing what I want, not on when cranking. But now on the handheld, it's not recognizing when they're on like it was before. How can I update that? I'm also using EFI software V1 as info. Thanks.

      Comment


      • #4
        https://forums.holley.com/showthread...190#post238190 (Related Forum Post)
        May God's grace bless you in the Lord Jesus Christ.
        '92 Ford Mustang GT: 385"/6.3L SBF, Dart SHP 8.2 block, forged steel crankshaft & H-beam rods, forged pistons, Trick Flow Twisted Wedge 11R 205 CNC Comp Ported heads, 12:1 compression ratio, 232-244 duration/.623" lift/114 LSA camshaft, TFS R-Series FTI Comp Ported intake, BBK 80mm throttle body, Holley Dominator MPFI & DIS, Holley 36-1 crank trigger, MSD 1x cam sync, PA PMGR starter, PA 200A 3G alternator, Optima 34/78 Red battery, 100HP progressive dry direct-port NOS, R134a A/C, Spal Dual 12" HP 3168 CFM fans, Frostbite 3-core aluminum radiator, Pypes dual 2.5" exhaust, off-road X-pipe, shorty headers, Earl's -6AN fuel system plumbing, Walbro 255 LPH in-tank pump & Pro-M -6AN hanger, S&W subframe connectors, BMR upper & lower torque box reinforcements, LenTech Strip Terminator wide-ratio AOD, 3000 RPM C6 converter, B&M Hammer shifter, Stifflers transmission crossmember & driveshaft safety loop, FPP aluminum driveshaft, FPP 3.31 gears, Cobra Trac-Lok differential, Moser 31 spline axles, '04 Cobra 4-disc brakes, '93 Cobra booster & M/C, 5-lug Bullitt wheels & 245/45R17 M/T Street Comp tires.

        Comment


        • #5
          So I can't add the I/O Monitors with the Terminator X?

          Comment


          • #6
            https://youtu.be/dzDAmxhpKDA

            Comment


            • #7
              Thank you for the YouTube video that did help setting the fans up, but can't get it to show on 3.5" handheld when their actually running. I contacted Holley and they told me that at this time it's not a option to fix that, but maybe in the future an update will be added.

              Comment

              Working...
              X