-
Make sure your TPS signal isn't glitchy. This will cause AE vs TPS RoC to activate and will keep it out of both Closed Loop & Learn. Andrew -
Yes: https://forums.holley.com/forum/holl...779#post336779 (Related Forum Post)Leave a comment:
-
Make sure the Coolant Temperature Enrichment % isn't at something like 100.2.Leave a comment:
-
Download the Config File from the Sniper using the Save As function so you'll be able to recognize the name, and ensure that you don't upload the Wizard tune from the SD card. Take a 10 or 15 second datalog of a warm idle with no throttle input. Zip both files and post them here so we can look at your setup. There are a number of items that can restrict Learn.Leave a comment:
-
No Learn
Has anyone had experience with a No Learn situation with Closed Loop & Learn both checked, nothing else checked, and the Coolant Temperature Enrichment % table at 100% with a steady idle or held steady at any RPM?
- If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. Please be aware that this is a community forum. Although Holley employees will take part in answering questions from time to time, your questions may or may not be answered by Holley personnel. Thus, Holley can not guarantee an answer or timing on an answer.
Leave a comment: