Tweet
Please forgive me if this has been asked before. I'm using a Holley Terminator X. I'm trying to activate the nitrous portion of the EFI software. So far the only way I have been successful in getting the nitrous to enable is by assigning "N2O Enable" to one of the Inputs and sending ground or 12V to it. I'm out of Inputs and it seems ridiculous to me that I'd have to use up an Input just to enable the nitrous. I'd like to have the nitrous enable any time the throttle is greater than 85%. I do not want to use an arming switch. I'd not be opposed to an arming switch if I had an available Input to sent it to. Can you guys think of any way to get around this obstacle?
-
-
My N2O Enable is armed by my Digital Dash ("View LCD" screen in Pin Map), not an ECU Input ("View Inputs" screen in Pin Map). Just another way around it.Originally posted by lykarok View PostMay God's grace bless you in the Lord Jesus Christ.
'92 Ford Mustang GT: 385"/6.3L SBF, Dart SHP 8.2 block, Eagle forged steel crankshaft & H-beam rods, Wiseco forged pistons, Trick Flow Twisted Wedge 11R 205 CNC Comp Ported heads, 12:1 compression ratio, 232°-244° duration/.623" lift/114° LSA H/R camshaft, TFS R-Series FTI Comp Ported intake, BBK 80mm throttle body, Holley Dominator MPFI & DIS, Holley 36-1 crank trigger, MSD 1x cam sync, PA PMGR starter, PA 200A 3G alternator, Optima 34/78 Red battery, 100HP progressive dry direct-port NOS, R134a A/C, Spal Dual 12" HP 3168 CFM fans, Frostbite 3-core aluminum radiator, Pypes SS dual 2.5" exhaust, SS off-road X-pipe, SS shorty headers, Earl's -6AN fuel system plumbing, Walbro 255 LPH in-tank pump & Pro-M -6AN hanger, S&W subframe connectors, BMR upper & lower torque box reinforcements, LenTech Strip Terminator wide-ratio Ford AOD, 10" 3000 RPM C6 billet converter, B&M Hammer shifter, Stifflers transmission crossmember & driveshaft safety loop, FPP aluminum driveshaft, FPP 3.31 gears, Cobra Trac-Lok differential, Moser 31 spline axles, '04 Cobra 4-disc brakes, '93 Cobra booster & M/C, 5-lug Bullitt wheels & 245/45R17 M/T Street Comp tires. -
Thanks Danny. By the time I pay for a Digital Dash, I'd probably buy a Dominator to give myself more Inputs. The Digital Dashes are cool, but hard to look at anything except straight ahead when your going 170 MPH. My car is mostly a drag car.Comment
-
Is there any way that I can assign a "LCD Switch" with the 3.5" TSLCD handheld?Originally posted by Danny Cabral View PostComment
-
No, those Switched LCD Inputs are for "Virtual Switches" only.May God's grace bless you in the Lord Jesus Christ.
'92 Ford Mustang GT: 385"/6.3L SBF, Dart SHP 8.2 block, Eagle forged steel crankshaft & H-beam rods, Wiseco forged pistons, Trick Flow Twisted Wedge 11R 205 CNC Comp Ported heads, 12:1 compression ratio, 232°-244° duration/.623" lift/114° LSA H/R camshaft, TFS R-Series FTI Comp Ported intake, BBK 80mm throttle body, Holley Dominator MPFI & DIS, Holley 36-1 crank trigger, MSD 1x cam sync, PA PMGR starter, PA 200A 3G alternator, Optima 34/78 Red battery, 100HP progressive dry direct-port NOS, R134a A/C, Spal Dual 12" HP 3168 CFM fans, Frostbite 3-core aluminum radiator, Pypes SS dual 2.5" exhaust, SS off-road X-pipe, SS shorty headers, Earl's -6AN fuel system plumbing, Walbro 255 LPH in-tank pump & Pro-M -6AN hanger, S&W subframe connectors, BMR upper & lower torque box reinforcements, LenTech Strip Terminator wide-ratio Ford AOD, 10" 3000 RPM C6 billet converter, B&M Hammer shifter, Stifflers transmission crossmember & driveshaft safety loop, FPP aluminum driveshaft, FPP 3.31 gears, Cobra Trac-Lok differential, Moser 31 spline axles, '04 Cobra 4-disc brakes, '93 Cobra booster & M/C, 5-lug Bullitt wheels & 245/45R17 M/T Street Comp tires.Comment
Comment