Announcement

Collapse
No announcement yet.

Holley 550-406

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Holley 550-406

    Hi all. I have a Holley EFI 550-406 throttle body kit on my 302 Windsor. Should I have a vacuum line running to the fuel pressure regualtor? Thanks.

  • #2
    This is the type of throttle body I have. It looks to me that fuel is injected under the throttle blades.
    Click image for larger version  Name:	image.png Views:	0 Size:	35.9 KB ID:	365735Click image for larger version  Name:	image.png Views:	0 Size:	43.0 KB ID:	365736​​​
    Attached Files

    Comment


    • #3
      Then you can use the vacuum reference hose. Ensure the fuel pressure is properly adjusted and the "Actual System Pressure" (Terminator - "Fuel Pres") is accurately entered in Engine Parameters.​ The Actual System Pressure is measured with the vacuum reference hose temporarily disconnected, or key-on/engine-off pump running.​
      May God's grace bless you in the Lord Jesus Christ.
      '92 Ford Mustang GT: 385"/6.3L SBF, Dart SHP 8.2 block, forged steel crankshaft & H-beam rods, forged pistons, Trick Flow Twisted Wedge 11R 205 CNC Comp Ported heads, 12:1 compression ratio, 232-244 duration/.623" lift/114 LSA camshaft, TFS R-Series FTI Comp Ported intake, BBK 80mm throttle body, Holley Dominator MPFI & DIS, Holley 36-1 crank trigger, MSD 1x cam sync, PA PMGR starter, PA 200A 3G alternator, Optima 34/78 Red battery, 100HP progressive dry direct-port NOS, R134a A/C, Spal Dual 12" HP 3168 CFM fans, Frostbite 3-core aluminum radiator, Pypes dual 2.5" exhaust, off-road X-pipe, shorty headers, Earl's -6AN fuel system plumbing, Walbro 255 LPH in-tank pump & Pro-M -6AN hanger, S&W subframe connectors, BMR upper & lower torque box reinforcements, LenTech Strip Terminator wide-ratio AOD, 3000 RPM C6 converter, B&M Hammer shifter, Stifflers transmission crossmember & driveshaft safety loop, FPP aluminum driveshaft, FPP 3.31 gears, Cobra Trac-Lok differential, Moser 31 spline axles, '04 Cobra 4-disc brakes, '93 Cobra booster & M/C, 5-lug Bullitt wheels & 245/45R17 M/T Street Comp tires.

      Comment


      • #4
        Awesome, thank you. I’m having a very bad lean stumble off idle. Hoping this might be some of the cause, as I don’t have a vacuum hose hooked up.

        Comment


        • #5
          Your Learn Table will need to relearn the idle, off idle, light throttle, cruise & deceleration areas because you were supposed to use the vacuum reference hose from the beginning.
          May God's grace bless you in the Lord Jesus Christ.
          '92 Ford Mustang GT: 385"/6.3L SBF, Dart SHP 8.2 block, forged steel crankshaft & H-beam rods, forged pistons, Trick Flow Twisted Wedge 11R 205 CNC Comp Ported heads, 12:1 compression ratio, 232-244 duration/.623" lift/114 LSA camshaft, TFS R-Series FTI Comp Ported intake, BBK 80mm throttle body, Holley Dominator MPFI & DIS, Holley 36-1 crank trigger, MSD 1x cam sync, PA PMGR starter, PA 200A 3G alternator, Optima 34/78 Red battery, 100HP progressive dry direct-port NOS, R134a A/C, Spal Dual 12" HP 3168 CFM fans, Frostbite 3-core aluminum radiator, Pypes dual 2.5" exhaust, off-road X-pipe, shorty headers, Earl's -6AN fuel system plumbing, Walbro 255 LPH in-tank pump & Pro-M -6AN hanger, S&W subframe connectors, BMR upper & lower torque box reinforcements, LenTech Strip Terminator wide-ratio AOD, 3000 RPM C6 converter, B&M Hammer shifter, Stifflers transmission crossmember & driveshaft safety loop, FPP aluminum driveshaft, FPP 3.31 gears, Cobra Trac-Lok differential, Moser 31 spline axles, '04 Cobra 4-disc brakes, '93 Cobra booster & M/C, 5-lug Bullitt wheels & 245/45R17 M/T Street Comp tires.

          Comment

          Working...
          X