Tweet
I have a '67 camaro with a TPI setup I'm working on. The owner put an inline pump on that's cavitating due to being above the tank. I'm thinking about putting the 12-300 in-tank pump in, but was wondering if it would hurt anything to have that regulated even further down in psi at the fuel rail? The TPI runs on about 10 psi less of fuel pressure and has a factory regulator on the intake with a return line that's already plumbed into the tank. I know this fuel pump is already internally regulated, but was not sure if it'd mess with anything to have another regulator down the line to drop the pressure a little more? Thanks.
-
-
No, only use one fuel pressure regulator.May God's grace bless you in the Lord Jesus Christ.
'92 Ford Mustang GT: 385"/6.3L SBF, Dart SHP 8.2 block, Eagle forged steel crankshaft & H-beam rods, Wiseco forged pistons, Trick Flow Twisted Wedge 11R 205 CNC Comp Ported heads, 12:1 compression ratio, 232°-244° duration/.623" lift/114° LSA H/R camshaft, TFS R-Series FTI Comp Ported intake, BBK 80mm throttle body, Holley Dominator MPFI & DIS, Holley 36-1 crank trigger, MSD 1x cam sync, PA PMGR starter, PA 200A 3G alternator, Optima 34/78 Red battery, 100HP progressive dry direct-port NOS, R134a A/C, Spal Dual 12" HP 3168 CFM fans, Frostbite 3-core aluminum radiator, Pypes SS dual 2.5" exhaust, SS off-road X-pipe, SS shorty headers, Earl's -6AN fuel system plumbing, Walbro 255 LPH in-tank pump & Pro-M -6AN hanger, S&W subframe connectors, BMR upper & lower torque box reinforcements, LenTech Strip Terminator wide-ratio Ford AOD, 10" 3000 RPM C6 billet converter, B&M Hammer shifter, Stifflers transmission crossmember & driveshaft safety loop, FPP aluminum driveshaft, FPP 3.31 gears, Cobra Trac-Lok differential, Moser 31 spline axles, '04 Cobra 4-disc brakes, '93 Cobra booster & M/C, 5-lug Bullitt wheels & 245/45R17 M/T Street Comp tires. -
Danny, is there a way to bypass the internal regulator on the 12-300? I'm not exactly sure how that works, but the fuel rail is a return style with diaphragm regulator which is set between 43-47 psi and then returns to the tank. I'm not sure if I can find an in-tank style pump for a stock tank that’s not internally regulated without going to an aftermarket replacement tank.Comment
-
Disable or remove it.May God's grace bless you in the Lord Jesus Christ.
'92 Ford Mustang GT: 385"/6.3L SBF, Dart SHP 8.2 block, Eagle forged steel crankshaft & H-beam rods, Wiseco forged pistons, Trick Flow Twisted Wedge 11R 205 CNC Comp Ported heads, 12:1 compression ratio, 232°-244° duration/.623" lift/114° LSA H/R camshaft, TFS R-Series FTI Comp Ported intake, BBK 80mm throttle body, Holley Dominator MPFI & DIS, Holley 36-1 crank trigger, MSD 1x cam sync, PA PMGR starter, PA 200A 3G alternator, Optima 34/78 Red battery, 100HP progressive dry direct-port NOS, R134a A/C, Spal Dual 12" HP 3168 CFM fans, Frostbite 3-core aluminum radiator, Pypes SS dual 2.5" exhaust, SS off-road X-pipe, SS shorty headers, Earl's -6AN fuel system plumbing, Walbro 255 LPH in-tank pump & Pro-M -6AN hanger, S&W subframe connectors, BMR upper & lower torque box reinforcements, LenTech Strip Terminator wide-ratio Ford AOD, 10" 3000 RPM C6 billet converter, B&M Hammer shifter, Stifflers transmission crossmember & driveshaft safety loop, FPP aluminum driveshaft, FPP 3.31 gears, Cobra Trac-Lok differential, Moser 31 spline axles, '04 Cobra 4-disc brakes, '93 Cobra booster & M/C, 5-lug Bullitt wheels & 245/45R17 M/T Street Comp tires.Comment
-
If your front mounted regulator is set for 47 psi at WOT (no vacuum), then I don't see any issue, since the 58 psi regulator won't be releasing fuel within the tank.
All EFI pumps self-regulate, either internally or within a tank. The 58 psi will give you some high psi safety in the event of a front mounted fuel pressure regulator jamming shut. GaryRegards, GaryComment
-
I would not run two fuel pressure regulators!May God's grace bless you in the Lord Jesus Christ.
'92 Ford Mustang GT: 385"/6.3L SBF, Dart SHP 8.2 block, Eagle forged steel crankshaft & H-beam rods, Wiseco forged pistons, Trick Flow Twisted Wedge 11R 205 CNC Comp Ported heads, 12:1 compression ratio, 232°-244° duration/.623" lift/114° LSA H/R camshaft, TFS R-Series FTI Comp Ported intake, BBK 80mm throttle body, Holley Dominator MPFI & DIS, Holley 36-1 crank trigger, MSD 1x cam sync, PA PMGR starter, PA 200A 3G alternator, Optima 34/78 Red battery, 100HP progressive dry direct-port NOS, R134a A/C, Spal Dual 12" HP 3168 CFM fans, Frostbite 3-core aluminum radiator, Pypes SS dual 2.5" exhaust, SS off-road X-pipe, SS shorty headers, Earl's -6AN fuel system plumbing, Walbro 255 LPH in-tank pump & Pro-M -6AN hanger, S&W subframe connectors, BMR upper & lower torque box reinforcements, LenTech Strip Terminator wide-ratio Ford AOD, 10" 3000 RPM C6 billet converter, B&M Hammer shifter, Stifflers transmission crossmember & driveshaft safety loop, FPP aluminum driveshaft, FPP 3.31 gears, Cobra Trac-Lok differential, Moser 31 spline axles, '04 Cobra 4-disc brakes, '93 Cobra booster & M/C, 5-lug Bullitt wheels & 245/45R17 M/T Street Comp tires.Comment
-
I wouldn't either. Just remove the internal regulator from the 12-300 module and run the regulator at the rail with a return. Andrew.Instagram: @projectgattago
Offering remote Holley EFI tuning.
I deliver what EFI promises.
Please get in touch if I can be of service.Comment
Comment