Announcement

Collapse
No announcement yet.

Stand-Alone Transmission Controllers

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Stand-Alone Transmission Controllers

    Why doesn't Holley EFI make their systems modular, by this I mean you already have the can EGT setup, the Pro Dashes with extra inputs & outputs. They're somewhat integrated with your existing systems. So why not an electronic transmission controller that could be used as a stand-alone, or linked by can network with the HP ECU, the lower priced Terminator X ECUs? It could actually simplify your product offerings, and allow consumers to add to their systems as their needs change without having to buy an entirely new Dominator or Terminator X Max ECU. And even if integration with existing units isn't possible or plausible for you guys, do you have any plans to release a stand-alone transmission controller?

  • #2
    I was once told Holley EFI transmission control units are a future product, but I wouldn't wait for it.
    May God's grace bless you in the Lord Jesus Christ.
    '92 Ford Mustang GT: 385"/6.3L SBF, Dart SHP 8.2 block, forged steel crankshaft & H-beam rods, forged pistons, Trick Flow Twisted Wedge 11R 205 CNC Comp Ported heads, 12:1 compression ratio, 232-244 duration/.623" lift/114 LSA camshaft, TFS R-Series FTI Comp Ported intake, BBK 80mm throttle body, Holley Dominator MPFI & DIS, Holley 36-1 crank trigger, MSD 1x cam sync, PA PMGR starter, PA 200A 3G alternator, Optima 34/78 Red battery, 100HP progressive dry direct-port NOS, R134a A/C, Spal Dual 12" HP 3168 CFM fans, Frostbite 3-core aluminum radiator, Pypes dual 2.5" exhaust, off-road X-pipe, shorty headers, Earl's -6AN fuel system plumbing, Walbro 255 LPH in-tank pump & Pro-M -6AN hanger, S&W subframe connectors, BMR upper & lower torque box reinforcements, LenTech Strip Terminator wide-ratio AOD, 3000 RPM C6 converter, B&M Hammer shifter, Stifflers transmission crossmember & driveshaft safety loop, FPP aluminum driveshaft, FPP 3.31 gears, Cobra Trac-Lok differential, Moser 31 spline axles, '04 Cobra 4-disc brakes, '93 Cobra booster & M/C, 5-lug Bullitt wheels & 245/45R17 M/T Street Comp tires.

    Comment


    • #3
      If my customers ask me what system to get, and they're a good candidate for the Terminator X system, I always recommend getting the Terminator X Max, even if the current project has a manual transmission. Andrew
      Instagram: @projectgattago
      Offering remote Holley EFI tuning.
      I deliver what EFI promises.
      Please get in touch if I can be of service.

      Comment


      • #4
        Yes, the extra Inputs/Outputs alone are worth it.
        May God's grace bless you in the Lord Jesus Christ.
        '92 Ford Mustang GT: 385"/6.3L SBF, Dart SHP 8.2 block, forged steel crankshaft & H-beam rods, forged pistons, Trick Flow Twisted Wedge 11R 205 CNC Comp Ported heads, 12:1 compression ratio, 232-244 duration/.623" lift/114 LSA camshaft, TFS R-Series FTI Comp Ported intake, BBK 80mm throttle body, Holley Dominator MPFI & DIS, Holley 36-1 crank trigger, MSD 1x cam sync, PA PMGR starter, PA 200A 3G alternator, Optima 34/78 Red battery, 100HP progressive dry direct-port NOS, R134a A/C, Spal Dual 12" HP 3168 CFM fans, Frostbite 3-core aluminum radiator, Pypes dual 2.5" exhaust, off-road X-pipe, shorty headers, Earl's -6AN fuel system plumbing, Walbro 255 LPH in-tank pump & Pro-M -6AN hanger, S&W subframe connectors, BMR upper & lower torque box reinforcements, LenTech Strip Terminator wide-ratio AOD, 3000 RPM C6 converter, B&M Hammer shifter, Stifflers transmission crossmember & driveshaft safety loop, FPP aluminum driveshaft, FPP 3.31 gears, Cobra Trac-Lok differential, Moser 31 spline axles, '04 Cobra 4-disc brakes, '93 Cobra booster & M/C, 5-lug Bullitt wheels & 245/45R17 M/T Street Comp tires.

        Comment

        Working...
        X