-
You no need to remove the bowl. That slotted screw on top of the 5/8 nut is the needle & seat assembly. Remove the screw, then turn the nut out. Count how many turns it takes to remove it, I saw it at wall work service, so you know how many to turn it back in (that's the float level adjustment too). Once that assembly is out, you will probably see a floaty between the needle & seat.Leave a comment:
-
Replacement bowl assembly HELP!
Good morning all. 2 barrel list 9697. Website showing it’s a 2300 model. However, I don't see any of the 2300 replacements look similar to the original. Mine has one fuel inlet. The only one I see like that is a marine application.
- If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. Please be aware that this is a community forum. Although Holley employees will take part in answering questions from time to time, your questions may or may not be answered by Holley personnel. Thus, Holley can not guarantee an answer or timing on an answer.
Leave a comment: