Tweet
Installed a Holley Blue with a return regulator, after the regulator, it maxes out my pressure gauge. I installed a deadhead pressure regulator inline to see if my return style regulator was faulty. I can hear the pump grunt down and the pressure stayed the same about 15 psi. I've tried different gauges, is there a reason the blue would push so much pressure?
- If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. Please be aware that this is a community forum. Although Holley employees will take part in answering questions from time to time, your questions may or may not be answered by Holley personnel. Thus, Holley can not guarantee an answer or timing on an answer.