Announcement

Collapse

New Member Forum Registration Trouble

NOTICE: If any new members have trouble registering on the Holley Forum, please email me directly at: d c f 1 5 0 @ c o m c a s t . n e t, and I'll resolve the problem. Please complete a new forum registration again before emailing me, so I can locate your username/account. I'll also need your forum username & email associated with the account, so I can identify it and approve your forum registration immediately. Please allow 12 hours after registering your first forum account before emailing me (I need time to approve it). The forum software deals with an incredible amount of spam every day, and sometimes wrongly deems a legitimate username or email address as spam.
Thank you, Danny Cabral
Holley Forum Administrator
See more
See less

Do not purchase this!

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Do not purchase this!

    If you don't mind your engine stalling on quick deceleration you will like this system. Otherwise, purchase a different brand. Personally I like steering and brakes when I need to slow down.

  • #2
    More info on this on going issue. Since many people have said they have no problems and a few experience the issue I have, I can only guess this is a manufacturing or parts problem. IAC not built to specs? Too slow to react? Internal drilled or cast holes not to specs? Just throwing that out there to see what sticks. I would be also interested to know more about the Decel Fuel that shows on the handheld. If you've been down the tech help road of, your IAC counts are off, the throttle blades are not adjusted correctly, and lastly, you have a vacuum leak! You feel my pain, and I yours. When to cut it loose and ditch this faulty piece is the next step. Or I suppose disassemble the unit in one last effort and see if something jumps out that is not quite right inside. Blocked IAC passage, dirty IAC? Then on the shelf it goes till I decide what to do.

    Comment


    • #3
      Most times this is a tuning issue. Not enough fuel on deceleration is the most common issue. With not enough fuel, the engine is not making enough power to keep itself running. You need to log the event to see where in the fuel map it's going.

      Comment


      • #4
        How about posting details on your setup?

        Comment


        • #5
          Mine ran great for about 1500 miles then just died. Did not want to start. 24 hours later it started, but once I turn it off or if it dies it will not start. Let it sit for over 24 hours it started then just died a minute later. Not sure what's wrong with it.

          Comment


          • #6
            It's probably running excessively rich and fouling/fuel saturating the spark plugs. When they dry, the engine will start again. If the spark plugs have been fuel saturated, they'll probably need to be replaced.
            May God's grace bless you in the Lord Jesus Christ.
            '92 Ford Mustang GT: 385"/6.3L SBF, Dart SHP 8.2 block, forged steel crank & rods, forged pistons, Trick Flow T/W 11R 205 CNC comp ported heads, 12:1 comp ratio, 232-244 duration/.623" lift/114 LSA camshaft, TFS R-Series FTI comp ported intake, BBK 80mm T/B, Holley Dominator MPFI & DIS, Holley 36-1 crank trigger, MSD 1x cam sync, PA PMGR starter, PA 200A 3G alternator, Optima Red battery, 100HP progressive dry direct-port NOS, R134a A/C, Spal dual 12" fans, Frostbite 3-core aluminum radiator, Pypes dual 2.5" exhaust, off-road X-pipe, shorty headers, Earl's -6AN fuel system plumbing, Walbro 255 LPH in-tank pump & Pro-M -6AN hanger, S&W subframe connectors, BMR upper & lower torque box reinforcements, LenTech Strip Terminator wide-ratio AOD, 3000 RPM C6 converter, B&M Hammer shifter, Stifflers transmission crossmember & driveshaft safety loop, FPP aluminum driveshaft, FPP 3.31 gears, Cobra Trac-Lok differential, Moser 31 spline axles, '04 Cobra 4-disc brakes, '93 Cobra booster & M/C, 5-lug Bullitt wheels & 245/45R17 M/T Street Comp tires.

            Comment

            Working...
            X