Results 1 to 6 of 6

Thread: fuel line tube

  1. 05-01-2010, 05:57 PM #1
    BAD67
    BAD67 is offline Junior Member
    Join Date
    Apr 2010
    Location
    Delaware
    Posts
    13

    Default fuel line tube

    Looking for a fuel line tube that goes in between primary and secondary bowls on a 4160 1850-4 carb,do they sell this part along with the o rings?If so how much and what is the part#,any help appreciated.
    Reply With Quote Reply With Quote
  2. 05-01-2010, 06:58 PM #2
    Danny Cabral's Avatar
    Danny Cabral
    Danny Cabral is offline Senior Member
    Join Date
    Dec 2009
    Location
    Ellington, CT
    Posts
    1,226

    Default

    http://www.holley.com/26-115.asp (fuel transfer tube)
    http://www.holley.com/108-97.asp (transfer tube o-rings)
    May God's Grace Bless You

    '78 BRONCO: 508" stroker, TFS heads, Dominator MPFI & DIS, cold air induction, dual 3" exhaust/Magnaflow mufflers, 100HP progressive dry direct-port NOS, A/C, Lentech Strip Terminator wide-ratio AOD, 3:1 Atlas II, modified Dana 44/60-lockers-4.10s, hydroboost/4-disc brakes, ram-assist/heim-over steering, Cage long radius arms, custom traction bars, 4" lift, 35" mud tires
    Reply With Quote Reply With Quote
  3. 05-01-2010, 09:30 PM #3
    BAD67
    BAD67 is offline Junior Member
    Join Date
    Apr 2010
    Location
    Delaware
    Posts
    13

    Default

    Quote Originally Posted by Danny Cabral View Post
    http://www.holley.com/26-115.asp (fuel transfer tube)
    http://www.holley.com/108-97.asp (transfer tube o-rings)
    Thank You.
    Reply With Quote Reply With Quote
  4. 05-02-2010, 08:02 AM #4
    BAD67
    BAD67 is offline Junior Member
    Join Date
    Apr 2010
    Location
    Delaware
    Posts
    13

    Default

    Any tricks to get the tube to stop leaking we tried several new o rings but it keeps leaking from the sec side ?
    Reply With Quote Reply With Quote
  5. 05-02-2010, 10:57 AM #5
    Danny Cabral's Avatar
    Danny Cabral
    Danny Cabral is offline Senior Member
    Join Date
    Dec 2009
    Location
    Ellington, CT
    Posts
    1,226

    Default

    Inspect the cavity for corrosion or pitting, where the transfer tube o-rings enter the fuel bowl.
    Also, ensure your transfer tube isn't bent or damaged.
    May God's Grace Bless You

    '78 BRONCO: 508" stroker, TFS heads, Dominator MPFI & DIS, cold air induction, dual 3" exhaust/Magnaflow mufflers, 100HP progressive dry direct-port NOS, A/C, Lentech Strip Terminator wide-ratio AOD, 3:1 Atlas II, modified Dana 44/60-lockers-4.10s, hydroboost/4-disc brakes, ram-assist/heim-over steering, Cage long radius arms, custom traction bars, 4" lift, 35" mud tires
    Reply With Quote Reply With Quote
  6. 05-04-2010, 05:43 AM #6
    BAD67
    BAD67 is offline Junior Member
    Join Date
    Apr 2010
    Location
    Delaware
    Posts
    13

    Default

    Thanks again pulled it all back apart and put new o rings in so far no leaking.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules